The Technical Side of Every EpoxyArt33 Floor

Concrete Flooring Systems & Finishes

A service is what you need done. A system is how we deliver it. The right match depends on exposure, traffic, moisture, and the slab itself — here is the full toolbox.

Core Systems We Install

Each with its own dedicated technical guide

Decorative Flake Flooring

One system, three coverage variants — Light (25-45%), Medium (50-75%), Full (100%). Full Flake is the standard recommendation for residential garages.

Common uses: Garages, laundry rooms, commercial back-of-house

Full System Guide

Metallic Epoxy Flooring

Hand-poured pearlescent pigments create one-of-a-kind 3D floors. Compatible with garages; the premium choice for interiors and showrooms.

Common uses: Living areas, show garages, retail, offices

Full System Guide

Quartz Flooring Systems

Double-broadcast colored quartz locked under chemical-resistant coats — tunable slip resistance for wet areas.

Common uses: Pool decks, restrooms, locker rooms, kitchens

Full System Guide

Urethane Cement Flooring

Self-leveling cementitious urethane rated for thermal shock from -40°F to 250°F+ — the commercial kitchen standard.

Common uses: Cooklines, dish pits, breweries, food processing

Full System Guide

Polished Concrete

The slab itself, mechanically ground, densified, and polished. Nothing to peel — the lowest lifecycle-cost institutional floor.

Common uses: Schools, offices, retail, warehouses, modern homes

Full System Guide

Additional Systems We Specify

Quoted per project based on your application and slab condition

Solid Color Floor Coatings

Single-color 100% solids epoxy or urethane builds for clean, functional commercial and utility floors where decoration is secondary to performance.

Grind & Seal Concrete

Diamond grinding followed by a penetrating or topical sealer — an honest, budget-conscious alternative to full polishing for warehouses and back-of-house areas.

High-Performance Resinous Systems

Chemical-resistant novolac epoxies and specialty builds for labs, mechanical rooms, and aggressive-exposure environments. Specified case by case.

Exterior Textured Systems

UV-stable polyaspartic and AOX-50 aluminum-oxide textured finishes engineered for driveways, walkways, lanais, and pool surrounds in full Florida sun.

How We Match the System to Your Project

No system is automatically right for every project — these factors drive the recommendation:

Interior or exterior exposure (UV stability)
Traffic type — foot, rubber wheel, forklift, vehicle
Chemical and heat exposure
Moisture condition of the slab
Existing coatings or contamination
Slip-resistance requirements
Maintenance expectations
Desired appearance and budget

One property, multiple systems. A restaurant may need urethane cement on the cookline, quartz in restrooms, and polished concrete in the dining room. We zone the specification by application area — right system, right zone, right dollar.

Not Sure Which System You Need?

Send photos of your space and we will recommend the right system — with honest reasoning.