Epoxy Art 33 - Concrete Coatings & Surface Solutions Naples FL
All Case Studies

The Oasis Restaurant — 4,000 Sq Ft Blue Polished Concrete, Naples

Naples, FL 4,000 sq ft Concrete Polishing • Colored (Dyed) Polished Concrete • Restaurant Flooring

4,000 sq ft of ocean-blue dyed polished concrete across the dining room and bar of The Oasis in Naples, FL — mechanical grinding with exposed aggregate, blue concrete dye, densifier, progressive polishing and a stain-resistant guard. A bold, seamless floor that matches the tropical bar vibe and handles restaurant traffic without a coating to peel.

The Challenge

The Oasis wanted a statement floor to match its beach-bar identity — a deep blue finish, not a standard grey — across roughly 4,000 sq ft of dining room, bar and high-traffic walkways in Naples. The existing slab carried the marks of a working restaurant: patched areas, old anchor holes and uneven wear. The floor had to take spilled drinks, barstools, nightly cleaning and heavy foot traffic, and the work had to be scheduled around the business so the bar could keep operating.

Our Solution

  • 1Mechanical diamond grinding of the existing slab across approximately 4,000 sq ft, opening the surface and exposing the natural aggregate for the "sparkle" effect
  • 2Repair of anchor holes, cracks and patched areas so they blend into the finished surface
  • 3Penetrating blue concrete dye applied in multiple passes for even, saturated color — dye bonds inside the concrete, so there is no film to peel, chip or hot-tire mark
  • 4Lithium silicate densifier to chemically harden the surface and tighten the slab against spills
  • 5Progressive resin-bond polishing passes to a high-gloss finish that reflects the neon and pendant lighting
  • 6Stain-resistant guard applied as the final step for faster nightly cleanup in a bar environment
  • 7Work phased by zone around the restaurant's operating schedule

The Results

  • 4,000 sq ft of seamless ocean-blue polished concrete through the dining room, bar and entrance
  • Exposed aggregate "sparkle" under the lights — a one-of-a-kind look that no tile or coating reproduces
  • No coating to peel or scratch through: the color is in the concrete and the shine comes from the polish
  • Low-maintenance, slip-resistant-when-dry surface that cleans with a neutral cleaner and an auto-scrubber or mop
  • One more real Naples restaurant floor in the EpoxyArt33 portfolio — colored polished concrete at commercial scale

See the Transformation

Same dining-room angle toward the patio doors. Left: the ground slab with the first passes of blue dye going down. Right: the finished high-gloss polish.

After — the same dining room finished in high-gloss ocean-blue polished concrete at The Oasis, Naples FL
During — ground concrete slab in The Oasis dining room with the first passes of blue dye going down, Naples FL
DURING — DYE
AFTER

Project Photos

After — Low-angle view of the blue polished floor: exposed aggregate sparkle and light reflection at the bar
After — Low-angle view of the blue polished floor: exposed aggregate sparkle and light reflection at the bar
After — Dining room toward the patio doors, high-gloss blue polish reflecting the daylight
After — Dining room toward the patio doors, high-gloss blue polish reflecting the daylight
After — Bar lounge with the deep blue dyed polished concrete and neon reflections
After — Bar lounge with the deep blue dyed polished concrete and neon reflections
After — Bar walkway: repaired anchor holes blended into the polished surface
After — Bar walkway: repaired anchor holes blended into the polished surface
After — Aggregate exposure under the skylight next to the roll-up door
After — Aggregate exposure under the skylight next to the roll-up door

Prep & Process

The Oasis kept the same slab — here is what it looked like before and while we were grinding, dyeing and polishing it.

Before — Service walkway by the kitchen pass: the existing grey slab with hairline cracks and wear, before grinding
Before — Service walkway by the kitchen pass: the existing grey slab with hairline cracks and wear, before grinding
Prep — Bar corner after the first grinding passes: patches and old stains opened up, equipment still on the floor
Prep — Bar corner after the first grinding passes: patches and old stains opened up, equipment still on the floor
Prep — Ground slab looking back toward the bar: the surface is open and ready for repairs and dye
Prep — Ground slab looking back toward the bar: the surface is open and ready for repairs and dye
Process — Blue concrete dye going down in the dining room; the left side still shows the bare ground slab
Process — Blue concrete dye going down in the dining room; the left side still shows the bare ground slab
Process — Wet diamond pass on the service walkway: slurry from the grinding and honing steps before cleanup
Process — Wet diamond pass on the service walkway: slurry from the grinding and honing steps before cleanup

Interested in this system for your space? Learn more about our concrete polishing service or read the next case study.

Want Results Like These?

Free on-site evaluation and written estimate for your project.